Circuit/System Description

When the appropriate switch is used on the A103 Roof Console it will a serial data message to the K9 Body Control Module requesting movement of the sliding center console, the K9 Body Control Module will then send a serial data message to the K230 Front Floor Console Control Module which will then perform the forward or rearward function.

The Local Interconnect Network (LIN) Bus consists of a single wire with a transmission rate of 10.417 Kbit/s. The serial data is transmitted over a LIN circuit between a master control module and other LIN devices within a particular subsystem. If serial data communication is lost between any of the LIN devices on the LIN bus network, the master control module will set a no communication code against the non-communicating LIN device.