LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Yukon AT4 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Displays And Gauges >> Repair Instructions >> Head-Up Display Replacement (without Denali) >> Removal Procedure

Removal Procedure

WARNING:

Refer to SIR Warning .

CAUTION:

If a vehicle is equipped with a head curtain inflator module ensure that the inflator module and tether are undamaged. If tether or curtain airbag are damaged in any way, they must be replaced.

CAUTION:

Use care when working around the head curtain inflator module. Sharp tools may puncture the curtain airbag. If the head curtain inflator module is damaged in any way, it must be replaced.

  1. Disable the SIR system. SIR Disabling and Enabling
  2. GM5523097Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Upper Trim Panel (1) - Remove - Instrument Panel Upper Trim Panel Removal and Installation (without Denali)

  3. GM5580360Courtesy of GENERAL MOTORS COMPANY

    Head-Up Display Bolt (1) - Remove [ 4x ]

  4. Disconnect the electrical connector.
  5. Head-Up Display (2) - Remove