LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Yukon AT4 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Displays And Gauges >> Repair Instructions >> Head-Up Display Replacement (without Denali) >> Installation Procedure

Installation Procedure

  1. GM5580360Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

    2. NOTE:

    Ensure that each tab on the head-up display is properly seated in the mating hole for proper alignment.

  2. Head-Up Display (2) - Install
    3. CAUTION:

    Refer to Fastener Caution .

  3. Head-Up Display Bolt (1) - Install and tighten [ 4x ] - Fastener Specifications 
  4. GM5523097Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Upper Trim Panel (1) - Install - Instrument Panel Upper Trim Panel Removal and Installation (without Denali)

  5. Enable the SIR System. SIR Disabling and Enabling
scientia non olet · About LEMON Manuals