LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Yukon AT4 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Displays And Gauges >> Diagnostic Information and Procedures >> DTC B110A >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON/Vehicle in Service Mode.
  2. Verify the P29 Head-Up Display performs the following function with the switch in the appropriate state:
    • DIM + Switch - Head-up display brightness increases
    • DIM - Switch - Head-up display brightness decreases
    • UP Switch - Head-up display image moves up
    • DOWN Switch - Head-up display image moves down
    • INFO Switch - Head-up display image changes pages
    • POWER Switch - Head-up display image turns off
    • If the P29 Head-Up Display does not perform the expected function with the switch in the appropriate state 

      Refer to Circuit/System Testing.

    • Go to next step: If the P29 Head-Up Display performs the expected function with the switch in the appropriate state 
  3. All OK.
scientia non olet · About LEMON Manuals