Torque Converter Replacement

WARNING: This page is about a different car, the 2020 GMC Terrain and 2020 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Transmission Replacement (Front Wheel Drive) , or Transmission Replacement (All Wheel Drive) . Position the transmission assembly so the torque converter is facing up.
1	Torque Converter Assembly CAUTION: Only install the lift assist handles until it stops. Do not tighten. Over tightening the lift assist handles can cause damage to the torque converter. CAUTION: Lower the torque converter straight down. Failure to lower the torque converter straight down could damage the torque converter clutch lip seal inside the torque converter clutch assembly. CAUTION: Failure to raise the torque dampener assembly straight up could damage the torque dampener clutch lip seal inside the torque dampener clutch assembly. Special Tools DT-46409 Torque Converter Lifting Handles For equivalent regional tools, refer to Special Tools .

Callout

Component Name

Preliminary Procedures

Transmission Replacement (Front Wheel Drive) , or Transmission Replacement (All Wheel Drive) .
Position the transmission assembly so the torque converter is facing up.

Torque Converter Assembly

CAUTION:

Only install the lift assist handles until it stops. Do not tighten. Over tightening the lift assist handles can cause damage to the torque converter.

CAUTION:

Lower the torque converter straight down. Failure to lower the torque converter straight down could damage the torque converter clutch lip seal inside the torque converter clutch assembly.

CAUTION:

Failure to raise the torque dampener assembly straight up could damage the torque dampener clutch lip seal inside the torque dampener clutch assembly.

Special Tools
DT-46409 Torque Converter Lifting Handles
For equivalent regional tools, refer to Special Tools .