LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Terrain SLT, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Automatic Transmission - 6T40 (MNH MNK) Or 6T45 (MHG) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Input Speed Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2021 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the control solenoid valve and transmission control module assembly. Refer to Control Solenoid Valve and Transmission Control Module Assembly Replacement .
  2. GM1998829Courtesy of GENERAL MOTORS COMPANY

    Disconnect the input speed sensor electrical connector (1).

  3. GM1998841Courtesy of GENERAL MOTORS COMPANY

    Remove the input speed sensor bolt (2) M6 x 23.

  4. Remove the input speed sensor (3).
  5. Remove the 3 input speed sensor seals (1).