LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Terrain SLT, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Automatic Transmission - 9T45 (M3U) Or 9T50 (M3D M3H) - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P0711-P0713 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2020 GMC Terrain and 2020 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

For an overview of the component/system, refer to: Electronic Component Description

Circuit Description
Signal The control module input circuit has an internal resistance connected to 5 V.
Low Reference Grounded through the control module.
Component Description
B13 Transmission Fluid Temperature Sensor The component B13 is part of the wiring harness: Automatic Transmission Wiring Harness
The temperature sensor is a negative temperature coefficient thermistor, a resistor which changes based on temperature.
  • Low temperature produces a high resistance: 46 kohms @ -40°C (-40°F)
  • High temperature produces a low resistance: 70 ohms @ 140°C (284°F)
K71 Transmission Control Module The control module contains a microprocessor used to process input data to control outputs. The control module receives information from a variety of sensors, switches and serial data information from other control modules. This information is used to control a combination of solenoid valves to obtain the correct line pressure, gear ratio and torque converter clutch operation.

The sensor is an input to the control module K71.The input signal is used to determine the temperature of the fluid: Transmission