LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Terrain SLT, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Automatic Transmission - 9T45 (M3U) Or 9T50 (M3D M3H) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Park Release Lever and Park Pawl Actuator Installation >> Manual Shift Shaft and Park Release Lever Installation

Manual Shift Shaft and Park Release Lever Installation

WARNING: This page is about a different car, the 2020 GMC Terrain and 2020 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
GM4378860Courtesy of GENERAL MOTORS COMPANY
Manual Shift Shaft and Park Release Lever Installation

Callout Component Name
1 Park Pawl Actuator
2 Park Release Lever
3 Manual Shift Shaft
NOTE:

Lubricate the shaft with ATF to prevent damage to the manual shift shaft seal during installation.
4 Manual Shaft Detent Lever Hub Pin
CAUTION:

Refer to Fastener Caution .

Procedure

  1. Install a NEW manual shaft detent lever hub pin.
  2. Install the manual shaft detent lever hub pin to correct height.

Specification 
7.9 mm (0.38 in) (a)
scientia non olet · About LEMON Manuals