Drive Sprocket, Driven Sprocket, and Drive Link Installation

WARNING: This page is about a different car, the 2020 GMC Terrain and 2020 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Driven Sprocket Bearing
2	Driven Sprocket NOTE: Install the drive link with the colored links and/or part number facing up. The drive link, drive, and driven sprocket assemblies must be installed at the same time. The driven sprocket ball bearing inner race has a slight interference fit with the case. Tap gently with the palm of a hand or a soft tip hammer to install. The ball bearing should spin freely and smoothly.
3	Drive Link
4	Drive Sprocket
5	Drive Sprocket Retaining Ring
6	Drive Sprocket Thrust Washer