LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Terrain SLE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Automatic Transmission - 9T45 (M3U) Or 9T50 (M3D M3H) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Automatic Transmission Range Selector Lever Cable Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2020 GMC Terrain and 2020 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4590554Courtesy of GENERAL MOTORS COMPANY

    Install the transmission range selector cable bracket (1).

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the transmission range selector lever cable bracket bolts (2) and tighten to 22 N.m (16 lb ft).
  3. Connect the range selector lever cable to the range selector lever cable bracket. Automatic Transmission Range Selector Lever Cable Replacement 
  4. Check the range selector cable adjustment. Range Selector Lever Cable Adjustment
scientia non olet · About LEMON Manuals