Control Valve Solenoid Body Wiring Harness Installation
WARNING: This page is about a different car, the 2020 GMC Terrain and 2020 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Control Valve Solenoid Body Wiring Harness Installation
| Callout | Component Name |
|---|---|
| 1 | Automatic Transmission Fluid Temperature Sensor Seal Procedure Install a NEW seal. Do NOT reuse the old seal. |
| 2 | Automatic Transmission Wiring Harness Procedure Ensure you connect all the connectors to the valve body. Tighten 8 N.m (71 lb in)
NOTE:
The bolts are captured with harness. |
| 3 | Control Valve Solenoid Body Bolt Tighten 9 N.m (80 lb in) |
| 4 | Control Valve Body Bolt[3x] Procedure Hand tighten and follow torque sequence below. |