Control Valve Body Installation
WARNING: This page is about a different car, the 2020 GMC Terrain and 2020 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS COMPANY Control Valve Body Installation
| Callout |
Component Name |
| 1 |
1-2-3-4 Low and Reverse Clutch Fluid Passage Seal [5x]
Procedure
Install NEW seals. Do NOT reuse old seals. |
| 2 |
Control Valve Body |
| 3 |
Control Valve Body Bolt [5x]
Tighten in sequence
8 N.m (71 lb in) |