Instrument Cluster Replacement (Terrain)

WARNING: This page is about a different car, the 2020 GMC Terrain and 2020 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Instrument Panel Cluster Trim Plate Replacement (Equinox) , or Instrument Panel Cluster Trim Plate Replacement (Terrain)
1	Instrument Cluster Bolt [4x] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Instrument Cluster NOTE: The instrument cluster is programmed by a USB port located in the back of the cluster. Procedure Disconnect the electrical connector. If installing a NEW instrument cluster, program the cluster before installation. Control Module References

Callout

Component Name

Preliminary Procedure
Instrument Panel Cluster Trim Plate Replacement (Equinox) , or Instrument Panel Cluster Trim Plate Replacement (Terrain)

Instrument Cluster Bolt [4x]

CAUTION:

Refer to Fastener Caution .

Tighten
2.5 N.m (22 lb in)

Instrument Cluster

NOTE:

The instrument cluster is programmed by a USB port located in the back of the cluster.

Procedure

Disconnect the electrical connector.
If installing a NEW instrument cluster, program the cluster before installation. Control Module References