Front Seat Removal and Installation

WARNING: This page is about a different car, the 2020 GMC Terrain and 2020 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to SIR Warning . Preliminary Procedures Disable the SIR system. SIR Disabling and Enabling . Disconnect the seat belt from the tensioner. Front Seat Belt Retractor Replacement
1	Driver or Passenger Seat Bolt [4x] CAUTION: Fastener Caution . Procedure Adjust the seat to gain access to the bolts. Tighten 45 N.m (33 lb ft)
2	Driver or Passenger Seat Procedure Engage the seat adjuster locking retainer to keep the seat track locked in position during removal, if equipped. Disconnect the electrical connector. With the aid of an assistant, remove the front seat. Disengage the seat adjuster locking retainer to unlock the seat track after installation, if equipped. Enable the SIR System. SIR Disabling and Enabling .

Callout

Component Name

WARNING:

Refer to SIR Warning .

Preliminary Procedures

Disable the SIR system. SIR Disabling and Enabling .
Disconnect the seat belt from the tensioner. Front Seat Belt Retractor Replacement

Driver or Passenger Seat Bolt [4x]

CAUTION:

Fastener Caution .

Procedure
Adjust the seat to gain access to the bolts.
Tighten
45 N.m (33 lb ft)

Driver or Passenger Seat

Procedure

Engage the seat adjuster locking retainer to keep the seat track locked in position during removal, if equipped.
Disconnect the electrical connector.
With the aid of an assistant, remove the front seat.
Disengage the seat adjuster locking retainer to unlock the seat track after installation, if equipped.
Enable the SIR System. SIR Disabling and Enabling .