Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Hose Fitting Gasket |
| Brake Pedal Retainer |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Accelerator Pedal Position Sensor Bolt | 9 N.m (80 lb/in) |
| Brake Hose Fitting Bolt - Front and Rear | 40 N.m (30 lb-ft) |
| Brake Master Cylinder Reservoir Bolt | 8 N.m (71 lb/in) |
| Brake Pedal Bolt | 22 N.m (16 lb-ft) |
| Brake Pipe Fitting - Left Front, Left Rear, Right Front, Right Rear | 18 N.m (13 lb-ft) |
| Brake Pressure Modulator Valve Primary Pipe Fitting | 25 N.m (18 lb-ft) |
| Brake Pressure Modulator Valve Secondary Pipe Fitting | 25 N.m (18 lb-ft) |
| Front Brake Hose Bolt | 9 N.m (80 lb/in) |
| Master Cylinder Nut | 22 N.m (16 lb-ft) |
| Power Brake Booster Bolt | 19 N.m (14 lb-ft) |