Removal Procedure
WARNING:
Refer to Brake Dust Warning .
WARNING:
Refer to Brake Fluid Irritant Warning .
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the tire and wheel assembly. Tire and Wheel Removal and Installation
Brake Pipe Fitting (1) - Disconnect
Brake Hose Retainer (1) - Remove
Front Brake Hose Bolt (1) @ Strut Assembly - Remove
Brake Hose Fitting Bolt (1) - Remove
- NOTE:
Do not reuse the brake hose fitting gaskets.
Brake Hose Fitting Gasket (1) @ Brake Hose Fitting (2) - Remove and DISCARD [ 2x ]
- Plug the brake caliper inlet to prevent brake fluid loss and contamination.
Front Brake Hose (1) - Remove