Circuit/System Verification
- Ignition ON.
- Verify that DTCs P0557 or P0558 are not set.
- If the DTC is set
Refer to DTC P0556, P0557, or P0558 .
- Go to next step: If the DTC is not set
- If the DTC is set
- Verify that the brake booster vacuum system has no damage, leakage or incorrect installation, refer to Brake Assist System Diagnosis
- If damage, leakage or incorrect installation is found
Repair as necessary.
- Go to next step: If the inspection is OK
- If damage, leakage or incorrect installation is found
- Replace the B19B Brake Booster Vacuum Sensor.
- Verify the DTC does not set while operating the vehicle under the Conditions for Running the DTC.
- If the DTC sets
Replace the Power Brake Booster.
- Go to next step: If the DTC does not set
- If the DTC sets
- All OK.