LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Acadia SL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 9T50 (M3H), 9T60 (M3G) Or 9T65 (M3W) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Transmission Mount Strut Replacement (FWD) >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle .
  2. Prior to removing the mount, mark the mount fasteners to mount and mount to sub frame interfaces using spray paint or a marker for correct positioning during installation.
  3. Using a suitable jack stand, support the rear of the powertrain.
  4. Remove the transmission mount to bracket through bolt (1).
    GM4729017Courtesy of GENERAL MOTORS COMPANY
    5. NOTE:

    The nuts are reusable.

  5. Remove and DISCARD the rear mount to drivetrain and front suspension cradle bolts (2).
  6. Remove the transmission rear mount (3).
scientia non olet · About LEMON Manuals