LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Acadia SL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 9T50 (M3H), 9T60 (M3G) Or 9T65 (M3W) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Transmission Mount Replacement >> Removal Procedure

Removal Procedure

  1. Install the engine support fixture.
  2. Remove the battery tray. Battery Tray Replacement
  3. Transmission Mount Brace Bolt (1) - Remove [2x]
    GM5396008Courtesy of GENERAL MOTORS COMPANY
  4. Transmission Mount Brace (2) - Remove
  5. Transmission Mount Bolt (1) - Remove [2x]
    GM5396004Courtesy of GENERAL MOTORS COMPANY
  6. Remove the 4 transmission mount bolts (1) in sequence shown.
    Fig 1: Transmission Mount Bolts Loosening Sequence
    GM5396005Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    The stated fastener removal or installation sequence must be followed to avoid damage to the components of the mount assembly.

  7. Transmission Mount (2) - Remove
scientia non olet · About LEMON Manuals