LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Acadia SL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 9T50 (M3H), 9T60 (M3G) Or 9T65 (M3W) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Automatic Transmission Fluid Pan Drain Plug Replacement >> Installation Procedure

Installation Procedure

  1. Lower the vehicle.
    GM4486476Courtesy of GENERAL MOTORS COMPANY
    2. NOTE:

    If the transmission fluid filler cap cannot be accessed, proceed to Step 3 in this procedure.

  2. Remove the fluid fill cap (1), if accessible.
  3. Remove the left front wheel and tire assembly. Tire and Wheel Removal and Installation
  4. Remove the fluid filler plug (1) from the transmission.
    GM4487151Courtesy of GENERAL MOTORS COMPANY
  5. Fill the transmission to the proper level with the correct fluid. Transmission Fluid Level and Condition Check , and Adhesives, Fluids, Lubricants, and Sealers .
  6. Install the fluid fill cap (1), if accessible.
    GM4486476Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    If the transmission fluid filler cap cannot be accessed, proceed to step 7 in this procedure.

  7. Install the fluid filler plug (1) to the transmission and tighten to 40 N.m (30 lb ft).
    GM4487151Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Component Fastener Tightening Caution .

  8. Install the left front wheel and tire assembly. Tire and Wheel Removal and Installation
scientia non olet · About LEMON Manuals