Installation Procedure
WARNING: This page is about a different car, the 2023 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
Install the transmission mount (4).
- Install the transmission mount bolts (1, 2, 3) and tighten to 58 N.m (43 lb ft).
Install the transmission mount through bolt (1) and tighten to 100 N.m (74 lb ft).
- Remove the jack from the transmission.
- Lower the vehicle. Lifting and Jacking the Vehicle
CAUTION:
Refer to Fastener Caution .