LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Acadia SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 326 (Automatic Transmission - 9T60 (M3G) Or 9T65 (M3W) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Control Valve Body Cover Replacement (LGX) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2023 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4376124Courtesy of GENERAL MOTORS COMPANY

    Control Valve Body Cover (3) - Install - Control Valve Body Cover Installation

  2. GM4674675Courtesy of GENERAL MOTORS COMPANY

    Electrical Connector (1) - Connect

  3. GM5342134Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Wiring harness not shown for graphic clarity.

    Position the transmission wiring harness with brackets (3) as necessary.

    4. CAUTION:

    Refer to Fastener Caution .

  4. Engine Wiring Harness Transmission Clip Nut (2) - Install and tighten [2x] 9 N.m (80 lb in)
  5. Wiring Harness Retainer (1) - Install [2x]
  6. Battery Tray - Install - Battery Tray Replacement
  7. Fill the transmission to the proper level with NEW transmission fluid.
scientia non olet · About LEMON Manuals