Removal Procedure
WARNING: This page is about a different car, the 2023 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
Radiator Surge Tank Bolt (1) - Remove
- Radiator Surge Tank (2) - Reposition
- Disconnect the auxiliary fluid accumulator electrical connector.
- WARNING:
The automatic transmission fluid accumulator may be pressurized greater than 120 psi (827 kpa) and fluid may be hot. When servicing accumulator, key must be OFF for a minimum of 10 minutes. Do not open bleeder screw until instructed to do so or personal injury may result.
Remove the auxiliary fluid accumulator (2) from the transmission. Auxiliary Fluid Accumulator Removal