LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Acadia SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 272 (Automatic Transmission - 9T50 (M3H), 9T60 (M3G) Or 9T65 (M3W M3V) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Installation >> Park Pawl Actuator Installation

Park Pawl Actuator Installation

WARNING: This page is about a different car, the 2020 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
GM4378860Courtesy of GENERAL MOTORS COMPANY
Park Pawl Actuator Installation

Callout Component Name
1 Park Pawl Actuator
2 Manual Shaft Detent Lever Assembly
3 Manual Shaft
NOTE:

Lubricate the shaft with ATF to prevent damage to the manual shift shaft seal during installation.
4 Manual Shaft Detent Lever Hub Pin
CAUTION:

Refer to Fastener Caution .

Procedure

  1. Install a NEW manual shaft detent lever hub pin.
  2. Install the manual shaft detent lever hub pin to correct height.

Specification 
7.9 mm (0.38 in) (a)
scientia non olet · About LEMON Manuals