Heater Inlet And Outlet Pipe Replacement (LGX)

WARNING: This page is about a different car, the 2020 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Engine Rear Noise Shield Replacement Heater Inlet Hose@Heater Inlet and Outlet Pipe - Remove - Heater Inlet Hose Replacement (LGX without C69 Heater Core Inlet Tube to Heater Inlet and Outlet Pipe)Heater Inlet Hose Replacement (LGX with C69) Heater Outlet Hose@Heater Inlet and Outlet Pipe - Remove - Heater Outlet Hose Replacement (LGX without C69 Heater Core Outlet Tube To Heater Outlet Hose Connector)Heater Outlet Hose Replacement (LGX Auxiliary Water Pump to Heater Inlet and Outlet Pipe)Heater Outlet Hose Replacement (LGX without C69 Heater Outlet Hose Connector to Radiator Surge Tank)Heater Outlet Hose Replacement (LGX without C69 Heater Outlet Hose Connector to Auxiliary Water Pump)
1	Heater Inlet and Outlet Pipe Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Heater Inlet and Outlet Pipe
3	Heater Inlet and Outlet Pipe Gasket Install NEW