LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Acadia AT4 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 9T50 (M3H), 9T60 (M3G) Or 9T65 (M3W) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Transmission Rear Mount Bracket Replacement (AWD) >> Installation Procedure

Installation Procedure

  1. Position the transmission mount bracket (2) to the transmission.
    GM4287556Courtesy of GENERAL MOTORS COMPANY
    2. CAUTION:

    Refer to Fastener Caution .

    CAUTION:

    Refer to Torque-to-Yield Fastener Caution .

  2. Install the three NEW transmission mount bracket to transmission bolts (1) and tighten to 100 N.m (74 lb ft) plus 45 to 60 degrees.
  3. Install the transmission mount strut. Transmission Mount Strut Replacement 
scientia non olet · About LEMON Manuals