LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Acadia AT4 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 9T50 (M3H), 9T60 (M3G) Or 9T65 (M3W) - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> DTC P06AF >> Circuit/System Verification

Circuit/System Verification

  1. Ignition - On / Vehicle - In Service Mode
  2. Verify DTC P06AF is not set.
    • If the DTC is set 

      Replace the component: K20 Engine Control Module

    • Go to next step: If the DTC is not set 
  3. All OK.