Removal Procedure
Heater and Air Conditioning User Interface Control (1) - Remove - Heater and Air Conditioning User Interface Control Replacement (Equinox) , or Heater and Air Conditioning User Interface Control Replacement (Terrain)
Radio Control Bracket Bolt (1) - Remove [2x]
Radio Control Assembly (1) - Remove
- Use a plastic trim tool if necessary.
- Disconnect all electrical connectors.
Radio Control Bracket Bolt (1) - Remove [4x]
- Radio Control Bracket (2) - Remove
Instrument Panel Upper Compartment Bolt (1) - Remove [4x]
- Release the retaining tabs.
- Instrument Panel Radio Front Trim Plate (2) - Remove
Radio Control Bolt (1) - Remove [4x]
- Driver Information Display (2) - Remove