Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
- DTC P018B, P018C, P018D, P0231, P0232, P023F, P0641, or P1255 are not active.
- Fuel pump control is enabled and the fuel pump control state is normal.
- The ignition voltage is between 11 - 32 V.
- The engine has been running for greater than or equal to 30 s.
- The engine fuel flow is not 0.
- Low fuel level warning not present.
- The DTC runs continuously when the conditions above are met.