Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P2227Condition 1
BARO & Calculated BARO=The actual value is not within a predetermined range of the calculated value.
Condition 2
BARO=Less than 50 kPa (7.3 PSI)orGreater than 115 kPa (16.7 PSI)
P2228
BARO=Less than 2 V - For greater than 5 s
P2229
BARO=Greater than 4.5 V - For greater than 5 s
P2230
BARO=Signal noisy or erratic - For greater than 5 s