Conditions for Running the DTC

• DTCs related to the following system/component = Not Set
  • B23 Camshaft Position Sensor
  • B34 Engine Coolant Temperature Sensor
  • B52 Heated Oxygen Sensor
  • B74 Manifold Absolute Pressure Sensor
  • B75C Multifunction Intake Air Sensor
  • B150 Fuel Tank Pressure Sensor
  • B198 Fuel Composition Sensor
  • Q12 Evaporative Emission Purge Solenoid Valve
  • Q17 Fuel Injector
  • Engine Misfire
  • Evaporative Emission (EVAP) System
• BARO Sensor=Greater than 70 kPa (10.2 PSI)
• Engine Coolant Temperature@Cold Start-Up=Greater than -20°C (-4°F)
• Evaporative Emission (EVAP) Purge System=Inactive
• HO2S Heater Resistance Learn Status=Valid
• IAT Sensor=-20 to 150°C (-4 to 302°F)
• MAF Sensor=0 to 10, 000 g/s
• MAP Sensor=10 to 255 kPa (1.5 to 37 PSI)

Frequency the DTC runs=Continuously - After the running conditions are met