Conditions for Setting the DTC

P1516

• The following parameters are not within 2% of each other:
  • Desired Throttle Position
  • Throttle Position

DTC P2101 Condition 1

• The following parameters are not within 8% of each other:
  • Desired Throttle Position
  • Throttle Position

Condition 2

• Throttle Position Learn=Active
• Throttle Position=Greater than 36%

P2119 

The throttle blade has not reached the closed position after the engine has been turned off.

P2176 

Minimum Throttle Position Not Learned=Exceeded Number of Attempts