Circuit/System Description
WARNING: This page is about a different variant/trim than selected.
| Circuit | Description |
|---|---|
| Signal | The control module input circuit has an internal resistance connected to 5 V. |
| Low Reference | Grounded through the control module. |
| Component | Description |
|---|---|
| K20 Engine Control Module | The control module contains a microprocessor used to process input data to control outputs. The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly. |
| B65 Intake Manifold Pressure and Air Temperature Sensor | The assembly has several functions : Pressure The signal voltage increases when the pressure increases. Temperature The temperature sensor is a negative temperature coefficient thermistor, a resistor which changes based on temperature.
Compressor Air Intake Turbocharger System Description The intake air temperature sensor 1 and the intake manifold pressure sensor are integrated in the same housing, which is located behind the throttle body.The sensor measures the temperature and pressure in the intake manifold between the throttle valve and the intake valves. |