Removal Procedure

WARNING: This page is about a different variant/trim than selected.

Air Conditioning Compressor Bracket Replacement (LYX) - Remove
Courtesy of GENERAL MOTORS COMPANY

Remove the turbocharger oil feed pipe bolt (1).
Remove and DISCARD the 2 turbocharger oil feed pipe gaskets (2).
Raise and support the vehicle. Lifting and Jacking the Vehicle

NOTE:

It is necessary to remove the catalytic converter to gain more space for the turbocharger oil feed pipe removal.

Courtesy of GENERAL MOTORS COMPANY

Remove the turbocharger oil feed pipe clip (1).
Remove and DISCARD the turbocharger oil feed pipe retainer (3).
Remove the turbocharger oil feed pipe (2).
Courtesy of GENERAL MOTORS COMPANY

NOTE:
The turbocharger oil feed pipe fitting is not reusable.

Remove and DISCARD the turbocharger oil feed pipe fitting (2).
Remove and DISCARD the turbocharger oil feed pipe fitting gasket (1).