Installation Procedure

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Timing Chain Guide(2) - Install
Timing Chain Guide Fastener(1) - Install and tighten[3x]10 N.m (89 lb in)
Courtesy of GENERAL MOTORS COMPANY

Release the tensioner plunger (1). Timing Chain Tensioner Replacement
Courtesy of GENERAL MOTORS COMPANY

Inspect the timing chain marks (1, 2, and 3) to confirm they remained aligned after engaging the timing chain tensioner.
Courtesy of GENERAL MOTORS COMPANY

Remove camshaft holding tool EN-51367 (1).
Using a suitable tool, rotate the crankshaft one complete engine cycle then verify the timing chain marks are aligned properly.
Engine Front Cover Replacement - Install