Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection (KL9)
- Lower Oil Pan - Remove - Lower Oil Pan Replacement (AWD) Lower Oil Pan Replacement (FWD)
Electrical Connector(1)@Engine Oil Level Indicator Control Module Wiring Harness - Disconnect
Electrical Connector(1)@Oil Pump Flow Control Solenoid Valve(1) - Disconnect
- { If equipped }Wiring Harness Retainer(2) - Remove [2x]
Wiring Harness Connector Bolt(1) - Remove
- Engine Oil Level Indicator Control Module Wiring Harness(2) - Remove