Installation Procedure

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Install the engine lift bracket (3) then install the engine wiring harness bracket (2).

CAUTION:

Refer to Fastener Caution .

Engine Lift Bracket Bolt(1) - Install and tighten [2x] 25 N.m (18 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Engine Wiring Harness Bracket Bolt(1) - Install and tighten10 N.m (89 lb in)
Charge Air Cooler Outlet Air Tube - Install - Charge Air Cooler Outlet Air Tube Replacement