Installation Procedure
WARNING: This page is about a different variant/trim than selected.
Apply tension to the drive belt tensioner (1) by rotating counterclockwise and hold tension.
- Drive Belt (2) - Install
- Slowly release the tension on the drive belt tensioner.(1)
- Inspect the drive belt for proper installation and alignment.
- Front Wheelhouse Liner-Right Side - Install - Front Wheelhouse Liner Replacement - Right Side (Equinox)Front Wheelhouse Liner Replacement - Right Side (Terrain)
- Lower the vehicle.
NOTE:
Navigate the belt (2) past the engine mount bracket (3) and properly install.