Crankshaft and Bearing Removal

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Crankshaft Lower Bearing (Qty: 5) NOTE: Crankshaft bearings MUST be separated, marked, or organized in a way to ensure installation to their original location and position, when suitable for use. If the lower half of the bearing is worn or damaged, both upper and lower halves should be replaced.
2	Crankshaft Assembly
3	Crankshaft Rear Oil Seal
4	Crankshaft Upper Bearing (Qty: 4)
5	Crankshaft Thrust Upper Bearing