Crankshaft Oil Deflector Installation
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| 1 | Crankshaft Oil Deflector |
| 2 | Crankshaft Oil Deflector Bolt[4x] Crankshaft Oil Deflector Bolt[3x]with Positive Crankcase Ventilation Oil Separator Drain Pipe{ If equipped }
CAUTION:
Refer to Fastener Caution . Procedure Tighten the bolts in the sequence shown. Tighten 10 N.m (89 lb in) |
| 3 | Positive Crankcase Ventilation Oil Separator Drain Pipe{ If equipped }
NOTE:
If replacing the drain pipe and the pipe is no longer available, the pipe does not need to be reinstalled. Replace the drain pipe bolt with a shorter crankshaft oil deflector bolt, see the EPC for the appropriate part number. |
| 4 | Positive Crankcase Ventilation Oil Separator Drain Pipe Bolt{ If equipped } Tighten 10 N.m (89 lb in) |