Installation Procedure
WARNING: This page is about a different variant/trim than selected.
Place a suitable adjustable jack under the fuel tank.
- Fuel Tank(1) - Install
Fuel Tank Strap(2) - Install[2x]
- Fuel Tank Strap Bolt(1) - Install and tighten[5x]25N.m (18 lb ft)
Fuel Tank Filler Hose(3) - Install
- Fuel Tank Filler Hose Clamp(2) - Install and tighten4N.m (35 lb in)
- Fuel Tank Vent Hose(1) - Connect - Plastic Collar Quick Connect Fitting Service
Evaporative Emission Canister Vent Hose(4) - Connect - Plastic Collar Quick Connect Fitting Service
- Fuel Pump Fuel Feed Hose(3) - Connect - Plastic Collar Quick Connect Fitting Service
- Fuel Tank Fuel Pump Module Wiring Harness(1)@Retainer - Install[2x]
- Fuel Tank Fuel Pump Module Wiring Harness(1) - Connect[2x]
- Underbody Rear Air Deflector - Install - Underbody Rear Air Deflector Replacement (FWD) , or Underbody Rear Air Deflector Replacement (AWD)
- Exhaust Muffler Assembly - Install - Exhaust Muffler Replacement (LTG, LYX)
- Lower the vehicle.
- Refill the fuel tank.
- Inspect for fuel leaks.
CAUTION:
Refer to Fastener Caution .