Diagnostic Aids
WARNING: This page is about a different car, the 2020 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- This DTC may be stored as a history DTC without affecting the operation of the device.
- If stored only as a history DTC and not retrieved as a current DTC, do not replace the device.
- If this DTC is retrieved as both a current and history DTC, replace the device that set the DTC.
- Resolve any current DTC's that are present relating to the Electronic Transmission Range Selector system prior to replacement of components or programming/setup of module. Faults in any component or module that work together in this system may cause the programming/setup failure.
- Replacement or inspection of Transmission Range Control Module requires rod linkage (if equipped) to be adjusted. If rod linkage is not properly adjusted, programming and setup procedure may fail and DTCs may set. Check Transmission Range Control Module rod linkage adjustment prior to replacing the Transmission Range Control Module. Something as simple as loosening the Transmission Range Control Module mounting bolts can cause the module to be out of adjustment.