Circuit/System Testing
WARNING: This page is about a different car, the 2020 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Verify the condition does not exist : Incorrect pressure - Refer to : Line Pressure Check , & Solenoid Valve Pressure (Gen 3)
- If a condition exists
Refer to : Fluid Pressure High or Low
- Go to next step : If no condition exists
- If a condition exists
- Ignition/Vehicle - Off
- Remove the component : Q8 Control Solenoid Valve Assembly
- Verify the procedure/test passes. - Refer to : Control Solenoid Valve and Transmission Control Module Assembly Solenoid Performance Test
- If the procedure/test does not pass
Replace the component : Q8 Control Solenoid Valve Assembly
- Go to next step : If the procedure/test passes
- If the procedure/test does not pass
- Refer to : Diagnostic Fault Information