Conditions for Setting the DTC

P0711

• The difference between the following parameters is greater than a predefined value :
  • TCM Temperature
  • Transmission Fluid Temperature
• The difference between the following parameters is greater than a predefined value :
  • TCM Power-Up Temperature
  • Transmission Fluid Temperature

The above conditions have to be met continuously for 5 min within a 6 min period.

P0712 

Transmission Fluid Temperature = Warmer than 253°C (487°F) - For greater than 1 min

P0713 

Transmission Fluid Temperature = Colder than -253°C (-423°F) - For greater than 1 min