Removal Procedure
Instrument Panel Outer Trim Cover - Right Side (1) - Remove
- Use a flat bladed plastic tool to remove.
- Reposition the weatherstrip as necessary.
Instrument Panel Trim Pad Bolt (1) - Remove
Front Floor Console Transmission Shift Opening Bezel (1) - Remove
- Use a flat bladed plastic tool to remove.
Automatic Transmission Control Bolt (1) - Remove [4x]
- Electronic Transmission Shift Control Pushbutton (2) - Remove
- Disconnect the electrical connector.
Instrument Panel Trim Pad - Right Side (1) - Remove
- Use a flat bladed plastic tool to remove.
- Disconnect the electrical connector.
- Transfer components as necessary.