Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connector.
Instrument Panel Trim Pad - Right Side (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Connect the electrical connector.
Electronic Transmission Shift Control Pushbutton (2) - Install
Automatic Transmission Control Bolt (1) - Install and tighten [4x] 2.5 N.m (22 lb in)
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Transmission Shift Opening Bezel (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Trim Pad Bolt (1) - Install and tighten 2.5 N.m (22 lb in)
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Outer Trim Cover - Right Side (1) - Install
Ensure that the weatherstrip is fully seated.