Instrument Panel Knee Bolster Replacement

GM3684273

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

1

Instrument Panel Knee Bolster Bolt (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Tighten
2.5 N.m (22 lb in)

2

Instrument Panel Knee Bolster

Procedure

Disconnect the hood release lever.
Use a flat-bladed plastic trim tool to release the 7 retainers securing the knee bolster to the instrument panel assembly.
Disconnect the electrical connection.
When replacing the knee bolster, transfer all necessary components.