Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Hose Fitting Gasket |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Master Cylinder Nut | 25 N.m (18 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Hose Bracket Bolt | 16 N.m (12 lb ft) |
| Brake Hose Fitting Bolt | 44 N.m (32 lb ft) |
| Brake Master Cylinder Reservoir Bolt | 8 N.m (71 lb in) |
| Brake Pedal Assembly Upper Nut | 23 N.m (17 lb ft) |
| Brake Pedal Pushrod Bolt | 10 N.m (89 lb in) |
| Brake Pipe Fitting - At Caliper Hose | 18 N.m (13 lb ft) |
| Brake Pipe Fitting - At Rear Brake Hose Assembly | 18 N.m (13 lb ft) |
| Master Cylinder Primary Brake Pipe Fitting | 45 N.m (33 lb ft) |
| Master Cylinder Secondary Brake Pipe Fitting | 45 N.m (33 lb ft) |
| Power Brake Booster Nut | 23 N.m (17 lb ft) |
| Power Brake Booster Pump Bracket Nut | 22 N.m (16 lb ft) |
| Power Brake Booster Pump M8 Bolt | 22 N.m (16 lb ft) |
| Power Brake Booster Pump M12 Bolt | 70 N.m (52 lb ft) |
| Rear Brake Hose Assembly Bracket Bolt | 16 N.m (12 lb ft) |