Transmission Control Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front floor console trim plate. WARNING: After installing the transmission range selector shift cable, pull up and push down on ALL connections to verify that the connections are fully seated and properly engaged. Failure to perform this task can result in the vehicle not being able to shift into PARK causing potential vehicle damage and bodily injury. Disconnect the range selector lever cable. Disconnect the transmission control electrical connectors.
1	Transmission Control Fasteners [4x] CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in).
2	Transmission Control

Callout

Component Name

Preliminary Procedure

Remove the front floor console trim plate.

WARNING:

After installing the transmission range selector shift cable, pull up and push down on ALL connections to verify that the connections are fully seated and properly engaged. Failure to perform this task can result in the vehicle not being able to shift into PARK causing potential vehicle damage and bodily injury.

Disconnect the range selector lever cable.
Disconnect the transmission control electrical connectors.

Transmission Control Fasteners [4x]

CAUTION:

Refer to Fastener Caution .

Tighten
9 N.m (80 lb in).

Transmission Control