Drive Sprocket, Driven Sprocket, and Drive Link Installation
 Courtesy of GENERAL MOTORS COMPANY
|
Drive Sprocket, Driven Sprocket, and Drive Link Installation
| Callout |
Component Name |
| 1 |
Driven Sprocket Bearing |
| 2 |
Driven Sprocket
NOTE:
- Install the drive link with the colored links and/or part number facing up.
- The drive link, drive, and driven sprocket assemblies must be installed at the same time.
- The driven sprocket ball bearing inner race has a slight interference fit with the case. Tap gently with the palm of a hand or a soft tip hammer to install.
- The ball bearing should spin freely and smoothly.
|
| 3 |
Drive Link |
| 4 |
Drive Sprocket |
| 5 |
Drive Sprocket Retaining Ring |
| 6 |
Drive Sprocket Thrust Washer |